• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Type: Waterproof Membrane
  • Place of Origin: Shandong, China (Mainland)
  • Brand Name: HUIYUAN and others
  • Model Number: 3MM, 4MM, 5MM
  • Type:: Waterproof memabrane
  • Place of Origin:: Shandong China
  • Brand:: Huiyuan
  • Thickness:: 2MM, 3MM, 4MM, 5MM
  • Width:: 1M
  • Length:: 10M, 7.5M
  • Surface:: PE Film, Mineral, Sand, AL foil
  • Certificate:: CE, ISO, SGS,
  • Usage:: Rood, road, subway, pool, bridge, tunnel
  • Name:: cheap roofing materials

Packaging & Delivery

Packaging Details Pallet
Delivery Time Within 6 days after receiving the deposit

Specifications

1.Name:roofing materials
2.Dampproof, ageing-resistant, leakproof.
3.National standards.
4.CE, ISO, SGS

 

ROOFING MATERIALS

 

1.Introduction

 

  ASPHALT ROOFING FELT modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as SBS, APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc.

 

2.Specification

 

Thickness

2mm,3mm, 4mm, 5mm

Width

1m

length

7.5m, 10m, 15m, or on demand

Base

Polyester or Fiberglass felt

Surface

PE film, Aluminum foil, Yellow sand, Shale gravel(Schist),   colored sand

Type

could self-adhesive

Notice

SBS modified bitumen membrane is specially applied in the cold district

 

3. Applications

 

1)        Roof and underground in industrial and civil buildings.

 

2)        Bridge, subway, tunnel, swimming pool, etc.

 

3)        Waste landfill, sewage plant, irrigation system, etc.

 

 

 

 

 

4.Advantages

 

1)       The SBS modified bitumen is showed good performance on waterproofness;

 

2)       It will be a high-strength membrane to resist water;

 

3)       Puncture-resisting, tear-resisting, corrosion-resisting, mould-resisting and weather-resisting;

 

4)       Good tensile strength and elongation;

 

5)       Strong adaptability for substrate shrinkage, deformation and cracks;

 

6)       Both high and low temperature resistance, especially in cold areas;

 

7)       Convenient to apply: use heat fusion method in all seasons.

 

 

5.Pictures for your reference

 

 

 

 

 

 

 

6. OUR FACTORY SHOW

 

7.CERTIFICATION SHOW

&<img src="http://i00.i.aliimg.com/img/pb/

 

8. Technical Index(Executive standard: GB18242-2008)

 

 

 

APP   Waterproof Membrane Reinforced   base

PY

G

Type

I

II

I

II

Content   of soluble substances(g/m2)≥

2mm

 

1300

3mm

2100

4mm

2900

Water   impermeability

Pressure   (Map)

0.3

0.2

0.3

Retention   time (min)

Impermeability   within 30 min

Heat   resistance °C

110

130

110

130

Tensile   strengthN/50mm≥

Longitudinal

450

800

350

500

Transverse

250

500

Elongation   at break %≥

Longitudinal

25%

40%

-------

-------

Transverse

Tear   strength N≥

Longitudinal

250

350

250

350

Transverse

170

200

Low   temperature flexibility°C

3

-10

3

-10

 

 

 

 

 

9.Storage and Transportation

 

 

 

1)        Different type and specification should be stacked separately;

 

 

 

2)        Avoid sun-scorched and rain-drenched, Be ventilation;

 

 

 

3)        The storage temperature should below 50°C;

 

 

 

4)        It have to be one storey when keep in storage stand on end, and shouldn't be more than two storeys when transporting;

 

 

 

5)        Avoid tilting or lateral drift, Covered with tarpaulin if need;

 

 

 

6)        Base on the normal storage and transportation, the storage period is one year from the date of production.

 

 

 

10  Construction Technology

 

 

 

1)     Base processing: the base surface must be clean, solid, level, dry; no grit, rift and loosing dust. For a large recess, fill it with cement mortar and then level it. Remove the protrusion and clean dust. If working on base slab or lateral face, water lowering should be done.

 

 

 

2)     Painting primer: before laying the membrane, clean the dust on the surface of concrete base with dust catcher or dust-blower.

 

 

 

3)     Heat to melt: place membrane correctly, fire torch, heat the membrane with base entirely, when the surface of the membrane is black and bright with a fusion layer, apply the membrane and press it into a solid and flat state. Before the membrane is cool, seal the edge of joint by float.

 

 

 

4)     Requirements for lapping: There should be less than 3 layers of lapping, with the joint seams appearing as "T" type, avoid 4 layers of lapping. The width of longitudinal lapping is between 50 and 80mm, and of end-lap joint 100mm.

 

  

 

 

 

 

Sample is free of charge.

 

Reasonable Price, Excellent Quality & Attentive Service

 

The delivery time is about 15-20 days after receiving the deposit.

 

We offer not just excellent products but service and market solutions.

 

Welcome to visit our homepage or contact with us for more information. Thank you.

 

 

 

 

Packaging

Items per Carton:10 Square Meters/Roll
Package Measurements:25X25X100 cm
Gross Weight:38.0 kg
Package Type:plastic bag

Shandong Huiyuan Building Materials Group Co., Ltd. is one of the largest manufacturers of construction materials in China. We can supply waterproof materials, plastic-steel luminous wall covers, light wall boards, Mg-fiberglass fireproof decoration boards, plastic products, paints and wooden products.

Being environmentally friendly, our products are exported to Southeast Asia, the Middle East, West Europe, Africa, and Australia. We have won a good reputation among customers around the ... View detail

Basic Information Indicates information has been verified onsite by a certification specialist

 Product/Service (We Sell):Waterproof Products (Flashing Tape,Self Adhesive Waterproof Membrane,Torch-on Waterproof Membrane)  
 Number of Employees:201 - 300 People  

Trade & Market

 Main Markets:Central America
Mid East
Eastern Asia
Oceania
Eastern Europe
South Asia
North America
South America
Southeast Asia
Africa
Domestic Market
 Export Percentage:91% - 100%  

Factory Information

 Factory Size (Sq.meters):30,000-50,000 square meters  
 Factory Location:Taitou Town, Shouguang City, Weifang City, Shandong Province, China  
 Number of Production Lines:10  
 Number of R&D Staff:5 - 10 People  
 Number of QC Staff:5 - 10 People  
 Contract Manufacturing:OEM Service Offered   Design Service Offered   Buyer Label Offered  

 

 
Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland) | Manufacturer, Trading Company
Transaction Level:
Supplier Assessments:
1 Transactions 3,000+
The supplier’s transactions conduted via Alibaba.com in the past 6 months.
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $155,000
Learn More